Generally, no one is ever comfortable with visible panty lines (VPL) which is why thong undies are an option. Regardless, women have different insights about thongs, some find them comfortable and vice versa.
Due to how difficult getting comfortable thongs can be, questions about making thongs from regular undies are being asked. Keep reading this blog post to find out if it’s possible.
So, Can You Make A Thong Out Of Regular Underwear?” Of course, you can design your own thong from your regular undies.
Designing your own thong is very easy and a good choice when you are not sure of your size, but you really want to own some thongs. You can decide to use your old or new undergarments, anyone would work just well provided that you follow the right techniques.
Contents
How do I make a thong out of regular underwear?
As aforesaid, designing a thong is very easy. You can do it even if you don’t have any sewing skills, but you’d require the appropriate direction which I’d provide below. Here are the prerequisites and instructions to design thongs out of regular undies.
Prerequisites
- Scissors.
- Normal undies.
- Sewing thread.
- Foe (fold over elastic).
- Needles.
- Textile machine.
- Pins.
- A fabric rotary cutter.
Step 1: Trim out the thong shape
Match the undies’ leg hole with the rear of the undies folded, and set it flat on a table. Make sure that the undies are well lined together, so the cut can be even on both sides.
- Starting from the portion closer to the undergarment’s waistband, cut off the leg hole bindings.
- Proceed with the cut in a straight line till you are about 2 inches from the undies back area.
- Then, curve the fabric rotary cutter to the below part of the undies, such that you’d have a triangle shape.
- Ensure you cut closer to the rear area of your undies and halt when you are ½ inch away from the middle.
- Do not stop cutting round, but stop when you get to where the undergarment lining starts.
- Work to the front of the undies whilst cutting the binding till you are at the top edge.
- Take out the leg hole cut totally. You’d notice the thong shape you want.
Step 2: Add the FOE (fold over elastic)
Use the foe to measure the leg hole of your new undies, ensure that it is 1½ inch smaller than the regular undergarment leg hole.
- Using the measurement you got after measuring, cut 2 pieces of the foe for each leg hole.
- Crinkle the foe front sides together, then pin and stitch the tip with the usage of a ¼ inch seam. In this part, ensure you use the needle (ballpoint needle to be precise) for straight stitching.
- Employ a pin to clinch the foe to one of the leg gaps on your new undies, on each side to match up to the upper edge. Nb- the foe is often smaller than the leg hole, so you’d have to pull for it to fit properly.
- Employ a pin to clutch the foe in the mid part of the undies on both sides. Don’t forget to pull for it to match.
Step 3: Sew the foe
Get your textile machine, also known as a sewing machine, ready to stitch your thong edges.
- Start sewing from the angle of the undies. Remove the pin on one side, then use a spread stitch while sewing with a ¼ inch seam near the raw edge.
- Ensure you spread the undies while you are sewing, so you can get the same size of the elastic and undergarment.
- Fold the foe inside the undies, so it will cover the exposed seam in the inner part.
- Hold the foe with a pin on the right side of the undies, and sew with a little zigzag stitch, so you can have a secured ½ inch away from the tip.
Step 4: Execute the exact process to the other leg hole
Not to forget you did it for only one side, it’s time to do it for the other side.
- Add the FOE, and pin it to both sides of the leg hole.
- Then, hold the foe with a pin in the middle part on each side.
- After doing that, proceed by sewing as instructed above.
- When you are done sewing the two-leg holes, carefully iron the sewn part on a low setting.
- Then, your thong is ready to be worn.
Trending Searches
Can I make my own thong?
Oh, yea! You can design your own thong. If you are the type that loves trying out a new craft, you can definitely have your thong sewn on your own. You can either use your new regular undergarment or you can purchase materials to design your thong undies.
The process is very easy, provided that you are following the right instructions. In fact, it is advisable to make your own thong, so you can be assured that you are using the right fabric for your comfort.
How do I make my own thong?
Just in case you want to make your own thong without your regular undies, I’d share with you the right steps and prerequisites to help you design your thong perfectly. Below are the process and requirements to design your own thong panties.
Requirements
- Measuring tape.
- Fabric (lace, cotton, silk, or any other fabric you want).
- Pins.
- Sewing thread.
- Textile machine.
- Scissors.
Step 1: Get your measurements
Employ your measuring tape to scale your hips to get the size for your thong’s waistband.
- After scaling your hips, gauge the upper part of your hips at the backside by putting the tape below your crotch area.
Step 2: Get the textile ready
This process requires a textile that is more than the size of the crotch (at least 2 times longer) and the waistband.
- Ensure the textile you are getting is about 2 inches broad, but that banks on the width size you want.
- Get 3 square inches of cotton material for the lining.
- Ensure the cotton shade is identical to the shade of the main textile.
Step 3: Cut the textile
You would be needing two pieces each for the waistband and crotch from the textile.
- Halve your hip size by two. Proceed by trimming the textile into two portions with the length.
- Use your crotch lengths to cut the textile into two equal pieces.
For instance:
If your hips are 34 inches and your crotch is 8 inches.
Divide the 34 inches by 2, you’d have 17 inches. Cut 17 inches each for the waistband. Then, use the 8 inches to cut the crotch fabric.
Step 4: Clasp the waistband and crotch textile pieces together
You need to align the waistband slabs concurrently before you start sewing.
- Put the slabs straight on each other and use pins to clinch the rims.
- Align the crotch slabs to each other and use about four to five pins to clasp the pieces in the inner horizontally. Although when you get to the rim of the crotch, the last pin should be towards the nook of the textile to make it look slanted.
Step 5: Sew waistband pieces
Get your textile machine ready, or if you are very good with needles and wool, you can make use of it.
- Employ a slanted stitch to sew the rim of the waistband you clutched. Ensure you remove the pin, before sewing.
- While sewing, make sure there is no leftover fabric out after the stitch.
Step 6: Sew the crotch
The stitching of the crotch will be different from the waistband, so you have to be cautious.
- Sew according to the pins in the middle of the textiles, following up to the diagonal line.
- Doing this will generate a larger portion at the front to meet with the waistband.
Step 7: Join the sewn waistband and crotch textiles together
Spread out the crotch slabs, so you can join them with the waistband.
- Join the larger side of the crotch and clasp it with the front angle of the waistband, then execute the same to the backside of the waistband.
- Then, employ a slanted stitch to sew the parts you clasped.
Step 8: Sew the cotton fabric
The cotton textile lining is crucial for hygiene and more comfort.
- Cut the cotton fabric into a size that will fit the crotch.
- Then, stitch the three angles of the textile to the crotch, whilst leaving one side to form a gusset.
Step 9: Finish up
You can decide to add a short ribbon to the front of the thong to make it look more beautiful. It doesn’t have to be a ribbon, it can be something else that you prefer.
Conclusion – Can You Make A Thong Out Of Regular Underwear?
Everyone has their opinion about thongs, but they are mostly worn to eradicate VPL. If you like to try out a new craft, you can design your own thong panties with your new or old undergarments or get new fabrics. The steps you need for the sewing process have been shared in this blog post. Good luck.